Sony Arouje

a programmer's log

Posts Tagged ‘DC DC

Home made DC – DC converter for Microprocessor

leave a comment »

One important tool when you deal with Microprocessors are, regulated power supply. To power my standalone Atmega’s and test the working I assembled a regulator in a breadboard along with Atmega. I cant relay on some thing running in a breadboard, a loose wire can create tiring troubleshooting. So I decided to build a permanent solution by creating a PCB and assembling the components.

My requirement is simple, connect a 12v adapter and I need 5v and 3.3v output. The 3.3v should provide a minimum 300mA. I have to use this power supply to power ESP8266 or any module that uses 3.3v. I am using LM2575 to provide 5v and LM1117 for 3.3v. Theoretically LM2575 can withstand upto 40v.

Below is the Schematic.

schematic

 

Here is the PCB I created and assembled at home.

Printed side

IMG_1374

Lacking some soldering skills, still learning how to solder well.

IMG_1373

 

I can give input voltage via the DC Jack or screw terminal. Three female pins at the right hand side provide 5v, GND and 3.3v. Forgot to include a LED to show the voltage status.

Advertisements

Written by Sony Arouje

June 30, 2016 at 11:42 pm

%d bloggers like this: