Working of my very basic and crude Aeroponic System
Here I will just show you a video of my Aeroponic system. As you can see its very basic, I didn’t want to spend much money to test whether my system works, so I used cost effective materials.
In one of my previous post I explained about how I used Rasberry pi to control the motor. If you haven’t read it, please check that out too.
Low Pressure Aeroponic System
What Next?
-
From this initial test run, I could see my system is a success. Now I will add more pillars and a high capacity tank.
-
Automate day to day activities. For e.g. I have to add nutrients to the reservoir once in two day. Using a Peristaltic pump and a motor driver I can automate the process with a click of a button from my mobile app.
 |
Scan using your mobile phone and access/share the post from your phone. |
Sony Arouje 
[…] Update: see my hydroponic in action. […]
Hydroponics system controlled by Raspberry Pi an overview | Sony Arouje Blog
December 17, 2014 at 1:49 pm
[…] using RF. So what am I going to control here, I wanted to control the water pump running in my hydroponic reservoir without running wires from my raspberry pi. This way I can extend my hydroponic system to […]
Connecting XBee to Raspberry pi | Sony Arouje Blog
December 20, 2014 at 6:07 pm
[…] one of my previous post I explained the working of my Aeroponic system. As I mentioned earlier, I wanted to automate one of the recurring task. Yes, adding […]
Hydroponic controller system controlled by Raspberry Pi | Sony Arouje Blog
February 11, 2015 at 10:05 pm
Thank you ffor sharing this
Elise D
July 7, 2023 at 12:00 pm